Testade precis denna varianten:
Citat:
How do I configure AHCI settings?
The best way to enable AHCI is to go to BIOS and enable AHCI mode, and then install the operating system.
Boot the system, enter BIOS setup, and change SATA settings from IDE to AHCI.
Install the operating system.
When Windows is installed without enabling the AHCI mode in BIOS setup, an error may occur during the booting.
Change the settings as shown below, or reinstall Windows.
Go to Start>Run, and then enter ""regedit"" in the Run window and press Enter to launch the Registry Editor.
HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > services > msahci In this menu, you will see an item named Start. Double-click it to change it to ""0""and then reboot.
Enter BIOS setup, and change SATA settings from IDE to AHCI.
▶ASUS Intel chipset : Main > Storage Configuration > Configure SATA as In this menu, select AHCI
▶ASUS AMD chipset : Main > Storage Configuration > SATA Mode Select In this menu, change to AHCI Mode
▶GIGABYTE Intel chipset : Integrated Peripherals > SATA RAID/AHCI Mode In this menu, select ""AHCI""
▶GIGABYTE AMD chipset : Integrated Peripherals > OnChip SATA Type In this menu, select AHCI
▶MSI Intel chipset/ AMD chipset : Integrated Peripherals > On-Chip ATA Devices > In RAID Mode, select AHCI
Gick och starta i ACHI läge nu vilket det inte gjorde innan.
Än så länge verkar det ju funka.
