Pardon my English, saxade frn ett annat forum dr jag inte ftt svar:
Error
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains errors.
File: \Windows\system32\winload.efi
Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer
Press Enter to try again
Press F8 for Startup Settings
Attempted fixes
1 - Press F8
Screen flashes quickly but nothing else happens
2 - Reboot computer with installation media (USB 3 stick)
Computer failed to get past POST check
Moved USB stick to another port and booted from it and followed this procedure:
Automatic System Repair - Didn't work
System Restore - Didn't work
BootRec /RebuildBCD, BootRec /FixBoot, BootRec /FixMBR - No difference here either
Refresh PC from repair DVD - "An error ocurred while refreshing your PC, no changes were made"
Ran diskpart etc:
Volume 0 - Ltr D - label *none* - Fs *none* - type DVD-ROM
Volume 1 - Ltr C - Label *none - Fs RAW - type Partition - Size 217GB - status healthy - info none
Volume 2 - Ltr * - Label *none - Fs RAW - Type Partition - Size 100MB - Status Healthy - info hidden
Volume 3 - Ltr * - Label *none - Fs RAW - Type Patrition - Size 900MB - Status Healthy - info hidden
Volume 4 - Ltr * - Label *none - FS RAW - Type Partition - Size 20GB - Status Healthy - info hidden
Volume 5 - Ltr E - Label WIN7AIO-SP1 - FS FAT32 - Type removable - size 28gb - Status Healthy - info hidden
bootrec.exe /fixboot = the request could not be performed because of an I/O device error.
bootrec.exe /ScanOs = total identified windows installations = 0
bootrec.exe /fixmbr = the request could not be performed because of an I/O device error.
bootrec.exe /rebuildbcd = total identified windows installations = 0
Startup repair does not help
Cannot restore without specified windows installation
Have no recovery image to use for system recovery
Memeory diagnostic comes out ok
cannot use disk commander = the request could not be performed because of an I/O device error.
tried running "setup" from x:/sources/recovery, did nothing (seems pretty much that there is nothing to be found to recover)
When trying to reinstall Windows with the same install and USB as I used first time it simply says I cant install on the primary directory, listed as 217GB free out of 217GB.
Also I cannot delete or format any of the 4 partitions (0 system, 1 OEM reserved, 2 Primary, 3 OEM reserved).
At this point Im hoping it would be possible to just wipe everything and get a clean start.
I installed Win 7 instead of win 8 a month ago on a brand new Asus laptop, was running smoothly until sudden BSOD yesterday when I was moving some files around (UEFI on GPT disk).
Now that I try the repair options etc via install USB every option takes ages to load.
Pressing "install now" and it then is stuck at "Setup is starting" for a good 30 minutes.
When booting up there was the option of choosing win 7 or win 8.1, although win 8.1 did not start if chosen.
Ive tried to start with last known working conf, without forced signed drivers, safe mode.
If I turn on secure boot option (and off CSM) in BIOS it wont even try booting but go back to BIOS instead.
WIn bootloader shows up though in BIOS, both with and without CSM active.
Error
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains errors.
File: \Windows\system32\winload.efi
Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer
Press Enter to try again
Press F8 for Startup Settings
Attempted fixes
1 - Press F8
Screen flashes quickly but nothing else happens
2 - Reboot computer with installation media (USB 3 stick)
Computer failed to get past POST check
Moved USB stick to another port and booted from it and followed this procedure:
Automatic System Repair - Didn't work
System Restore - Didn't work
BootRec /RebuildBCD, BootRec /FixBoot, BootRec /FixMBR - No difference here either
Refresh PC from repair DVD - "An error ocurred while refreshing your PC, no changes were made"
Ran diskpart etc:
Volume 0 - Ltr D - label *none* - Fs *none* - type DVD-ROM
Volume 1 - Ltr C - Label *none - Fs RAW - type Partition - Size 217GB - status healthy - info none
Volume 2 - Ltr * - Label *none - Fs RAW - Type Partition - Size 100MB - Status Healthy - info hidden
Volume 3 - Ltr * - Label *none - Fs RAW - Type Patrition - Size 900MB - Status Healthy - info hidden
Volume 4 - Ltr * - Label *none - FS RAW - Type Partition - Size 20GB - Status Healthy - info hidden
Volume 5 - Ltr E - Label WIN7AIO-SP1 - FS FAT32 - Type removable - size 28gb - Status Healthy - info hidden
bootrec.exe /fixboot = the request could not be performed because of an I/O device error.
bootrec.exe /ScanOs = total identified windows installations = 0
bootrec.exe /fixmbr = the request could not be performed because of an I/O device error.
bootrec.exe /rebuildbcd = total identified windows installations = 0
Startup repair does not help
Cannot restore without specified windows installation
Have no recovery image to use for system recovery
Memeory diagnostic comes out ok
cannot use disk commander = the request could not be performed because of an I/O device error.
tried running "setup" from x:/sources/recovery, did nothing (seems pretty much that there is nothing to be found to recover)
When trying to reinstall Windows with the same install and USB as I used first time it simply says I cant install on the primary directory, listed as 217GB free out of 217GB.
Also I cannot delete or format any of the 4 partitions (0 system, 1 OEM reserved, 2 Primary, 3 OEM reserved).
At this point Im hoping it would be possible to just wipe everything and get a clean start.
I installed Win 7 instead of win 8 a month ago on a brand new Asus laptop, was running smoothly until sudden BSOD yesterday when I was moving some files around (UEFI on GPT disk).
Now that I try the repair options etc via install USB every option takes ages to load.
Pressing "install now" and it then is stuck at "Setup is starting" for a good 30 minutes.
When booting up there was the option of choosing win 7 or win 8.1, although win 8.1 did not start if chosen.
Ive tried to start with last known working conf, without forced signed drivers, safe mode.
If I turn on secure boot option (and off CSM) in BIOS it wont even try booting but go back to BIOS instead.
WIn bootloader shows up though in BIOS, both with and without CSM active.