"Pairing not allowed" Headset till Ubuntu.

Hur tusan kopierar man från xterm så man kan kopiera in här?

#
# HCI daemon configuration file.
#

# HCId options
options {
# Automatically initialize new devices
autoinit yes;

# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security user;

# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;

# Default PIN code for incoming connections
passkey "0000";
}

# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "%h-%d";

# Local device class
class 0x3e0100;

# Default packet type
#pkt_type DH1,DM1,HV1;

# Inquiry and Page scan
iscan enable; pscan enable;
discovto 0;

# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;

# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
}

device 00:13:17:79:F7:31 {
name "Jabra BT325s" auth enable; encrypt enable;

}

sudo btsco -v 00:13:17:79:F7:31
btsco v0.42
Device is 1:0
Error: Failed to connect to SDP server: Permission denied
Assuming channel 2

Voice setting: 0x0060
Can't connect RFCOMM channel: Permission denied

dator@dator:~$ btsco -h

btsco bluetooth audio handler
Usage:
btsco [options] <bdaddr> [channel]
Options:
-v print verbose output
-r automatically reconnect upon lost rfcomm channel
-f fork and run as a daemon
-c clear filehandle and exit
-s indicate status by creating the file /tmp/bt_headset_connected
-i hciX : use interface hciX
-h print this usage and exit

The headset channel will be automatically detected if not specified

dator@dator:~$ btsco -v 00:13:17:79:F7:31 2
btsco v0.42
Device is 1:0
Voice setting: 0x0060
Can't connect RFCOMM channel: Permission denied
dator@dator:~$

#
# RFCOMM configuration file.
#

rfcomm0 {
# Automatically bind the device at startup
bind no;

# Bluetooth address of the device
device 00:13:17:79:F7:31;

# RFCOMM channel for the connection
channel 2;

# Description of the connection
comment "Jabra BT325s";
}

Configure A2DP Driver
This driver allows audio to be sent from an alsa client to a stereo bluetooth headset. The audio is one-way to the set.

Discover the headset's address by doing a bluetooth scan. The headset may need to be in pairing mode for this address to appear:

hcitool scan

The address will look something like 00:14:CF:03:17:8C

cp alsa-plugins/a2dpd/sample.a2dprc ~/.a2dprc

edit ~/.a2dprc to contain the address of your headset on the address= line.

create ~/.asoundrc with simply:

pcm.a2dpd {
type a2dpd
}

and run a2dpd (it's not advised to run it as root). You'll have to arrange for this to be started up subsequently.

You can also have the SDP records for A2DP and AVRCP activated at boot time; this may allow you in some setups to have the headset initiate the connection to a2dpd to start up a stream.

sdptool add A2SRC
sdptool add AVRTG