Spel ni aldrig klarade?

Alien World: Circuit Board Here are the steps to complete the circuit.
Step 1: Use the colored keys at the left and bottom of the screen as a guide to attaching the colored wires.
Step 2: Click once on the knob with the small red rrow.
Step 3: Click on the round lens with an opening in it until the opening is at approximately the 10 o'clock position.
Step 4: Click on the spigot right above the round lens. This will charge the red circuit at the left of the screen.
Step 5: Click on the round lens until the opening is at approximately the 2 o'clock position.
Step 6: Click on the spigot above the round lens to charge the ray.
Step 7: Click on the knob with the small red arrow.
Step 8. Click on the triangle until the red dot is in the lower right.
Step 9: Click on the ray to shoot light through the red dot.
Step 10: Click on the triangle until the yellow dot is in the lower right.
Step 11: Click on the ray to shoot light through the yellow dot.
Step 12: Click on the triangle until the blue dot is in the lower right.
Step 13: Click on the ray to shoot light through the blue dot.
Step 14: Click on the red, yellow and blue toggles in that order.
Step 15: Repeat steps 8 through 14.
When the circuit is complete, go back through the Threshold.
WynTech: Threshold Room Choose to be human by clicking on Jocilyn
Choose to be an alien by clicking on the Threshold.
GAME OVER, MAN!

www.spoonyexperiment.com