2010-10-07, 22:16
#1
Som rubriken lyder, hittar inte tändstiften!
Hittade följande från:
http://www.bba-reman.com/content.asp...technical_help
Det är punkt ett som förbryllar mig. Var är "the ignition coil module unit" för något?
Snälla, hjälp mig!
Hittade följande från:
http://www.bba-reman.com/content.asp...technical_help
Citat:
Vehicle:
Petrol engine model
Condition:
Spark plugs need replacing
Remedy:
1. Take out the ignition coil module unit.
2. Remove dirt using a clean brush or a vacuum cleaner focusing on the spark plug recesses before removing the spark plugs.
3. Unscrew the spark plugs using a suitable tool such as a spark plug spanner, and ensure the socket is aligned with the spark plug. The ceramic insulator may be broken if it has been moved to one side.
4. When the spark plugs have been removed it is advisable to check them, as they are an indication of the state of the engine. Therefore when the spark plug is removed then inspect the insulator nose, if it is clean and white with no deposits it indicates a weak mixture or too hot a plug.
5. If hard black looking deposits are noticeable on the tip and insulator nose it indicates a rich mixture, in addition if the plug is black and oily it indicates the engine is quite worn.
6. If light tan to greyish-brown deposits are noticeable on the insulator nose this indicates the mixture is at the correct level and the engine is in good condition.
7. Ensure the spark plug electrode gap is a correct size. If it is not then bend open or closed the outer plug electrode(s) until the correct measurement is achieved. Do not bend the centre electrode, this can crack the insulator and cause plug failure.
8. Before replacing the spark plugs ensure the threaded connector sleeves are tight and the plug exterior and threads are clean.
9. Tighten the plug to the required torque using the spark plug socket as well as a torque wrench.
10. Refit the ignition coil module unit.
Petrol engine model
Condition:
Spark plugs need replacing
Remedy:
1. Take out the ignition coil module unit.
2. Remove dirt using a clean brush or a vacuum cleaner focusing on the spark plug recesses before removing the spark plugs.
3. Unscrew the spark plugs using a suitable tool such as a spark plug spanner, and ensure the socket is aligned with the spark plug. The ceramic insulator may be broken if it has been moved to one side.
4. When the spark plugs have been removed it is advisable to check them, as they are an indication of the state of the engine. Therefore when the spark plug is removed then inspect the insulator nose, if it is clean and white with no deposits it indicates a weak mixture or too hot a plug.
5. If hard black looking deposits are noticeable on the tip and insulator nose it indicates a rich mixture, in addition if the plug is black and oily it indicates the engine is quite worn.
6. If light tan to greyish-brown deposits are noticeable on the insulator nose this indicates the mixture is at the correct level and the engine is in good condition.
7. Ensure the spark plug electrode gap is a correct size. If it is not then bend open or closed the outer plug electrode(s) until the correct measurement is achieved. Do not bend the centre electrode, this can crack the insulator and cause plug failure.
8. Before replacing the spark plugs ensure the threaded connector sleeves are tight and the plug exterior and threads are clean.
9. Tighten the plug to the required torque using the spark plug socket as well as a torque wrench.
10. Refit the ignition coil module unit.
Det är punkt ett som förbryllar mig. Var är "the ignition coil module unit" för något?
Snälla, hjälp mig!
